|Product Name:||ISO 21809 STANDARD EXTERNAL COATING WRAPPING TAPE FOR BURIED OR SUBMERGED PIPELIN USED IN PIPELINE TRANSPORTATION SYSTEM||Application:||Corrosion Protection For Steel Pipes|
|Thickness:||0.89 Mm,1.0 Mm,1.65 Mm||Color:||Black,white,yellow|
|Available Roll Size (width X Length):||50 - 800 Mm Wide 10m To 120 M Long||Similar Brand:||Polyken, Denso,Alta|
steel pipes coating materials,
pipe wrapping coating material
Iso 21809 External Pipe Coating Materials , pipe wrapping tape For Buried Or Submerged Pipelin
|Description-ISO 21809 STANDARD EXTERNAL COATING WRAPPING TAPE FOR BURIED OR SUBMERGED PIPELIN USED IN PIPELINE TRANSPORTATION SYSTEM||
The XUNDA-T300 series is Cold applied tape coating system for anti corrosion of field joints,fittings, and specifically piping. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing.
The Joint wrap tape shall be applied by hand or with a wrapping machine.
|Usage-ISO 21809 STANDARD EXTERNAL COATING WRAPPING TAPE FOR BURIED OR SUBMERGED PIPELIN USED IN PIPELINE TRANSPORTATION SYSTEM||Used for the corrosion protection of oil , gas ,water new pipelines and existing pipeline rehabilitation and field joints, fittings, and specialty piping. It is suitable to protect longitudinal and spiral weld pipe welds..|
Cold applied without special equipment.
Resistant to soil stress
Excellent adhesion to primed pipe and itself.
Can be applied over a wide temperature range.
Good conformability and consistent uniform thickness.
Compatible with common pipe coatings.
Excellent resistance to cathodic disbondment.
Long term in-ground performance
Meets ASTM D 1000 ,EN 12068,AWWA C214,C209,DIN30672 and other international standards
|Material:||Special blend of stabilized polyethylene backing+ Butyl rubber|
|Package:||12 rolls,8 rolls, 6 rolls,4 rolls per carton|
XUNDA T 300 Joint wrap tape :
TDS- XUNDA T 300 series joint wrap tape
System Properties : T389
How to store the Joint wrapping tape ?
The coating materials shall be stored in a clean, dry area
All materials shall be delivered to the jobsite in sealed and labelled containers and
shall be stored in a location that is protected from the elements, well ventilated and freefrom excessive heat, open flame, or other sources of ignition. Coating materials subjectto freeze shall be stored in a heated area.
The materials storerooms shall be appropriately ventilated and shall comply with applicable lawprovisions on safety and fire prevention.
Tape stored at jobsites or material yards shall be kept dry and under cover and never exposedto direct sunlight. Rolls shall not be stacked more than four (4) tiers high and never directly onthe ground or on irregular surfaces. The cores of stored tape rolls shall be vertical. Rolls shallnot be thrown or dropped. Hooks or other sharp handling devices shall not be used. Tape shallnot be stored in contact with protrusions capable of puncturing the material. Rolls or equipmentshall not be piled on top of or against stored tape.
Contact Person: Angelina Meng
Tel: + 8618853777531