|Product Name:||High Tach Pe Coated Aluminium Foil Butyl Rubber Tapes For Roofing||Backing:||Aluminium Foil|
|Adhesive:||Butyl Rubber||Adhesion:||Very Strong|
|Color:||Deep Red,blue，gray，black，sliver||Length:||10 M|
|Main Market:||Southeast Asia，Turkey，Australia||Similar Brand:||ALUband,Denso|
butyl rubber sealant tape,
self adhesive rubber tape
High Tack PE Coated Aluminium Foil Butyl Rubber Tape For Roofing , strong Adhesion
High tack Pe coated aluminium foil butyl rubber tapes for roofing comprising of an aluminium foil and a rubber adhesive. The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand.
Areas For Use
All surfaces must be dry, sound and free from oil, grease and dust Remove all loose material by scraper or wire brush. Porous surfaces, such as concrete or brick, should be primed using BLACK JACK BITUMEN AND FLASHING PRIMER and allowed to dry.
Cut to the required length. Peel beck approximately 5cm of release carrier and place the tape into position. Continue removing the release carrier whilst firmly placing the tape to avoid unnecessary creasing. Ensure intimate contact and that no air is trapped. Using a small roller ensure that all edges and overlaps are sealed properly. Overlaps should be at least 25mm.
|Foil Thickness||50 microns|
|Tape Strength||3.5 N/mm|
|Bond Strength To Primed Concrete||3.5 N/mm|
|Flexibility at -15°C||No cracking|
|Application Temperature Range||5 to 40°C|
|Service Temperature Range||-10 to 80°C|
Health & Safety
Consult MSDS for full list of hazards.
Store in original container in cool dry conditions. Keep away from sources of ignition.
12 months from date of manufacture in tightly sealed, undamaged containers.
The technical data contained herein is based on our present knowledge and experience and we cannot be held liable for any errors, inaccuracies, omissions or editorial failings that result from technological changes or research between the date of issue of this document and the date the product is acquired. Before using the product, the user should carry out any necessary tests in order to ensure that the product is suitable for the intended application. Moreover, all users should contact the seller or the manufacturer of the product for additional technical information concerning its use if they think that the information in their possession needs to be clarified in any way, whether for normal use or a specific application of our product. Our guarantee applies within the context of the statutory regulations and provisions in force, current professional standards and in accordance with the stipulations set out in our general sales conditions. The information detailed in the present technical data sheet is given by way of indication and is not exhaustive. The same applies to any information provided verbally by telephone to any prospective or existing customer.
|Colour||Pack Size||Box Qty|
|Lead Look||75mm x 10Mtr||8|
|100mm x 10Mtr||6|
|150mm x 10Mtr||4|
|225mm x 10Mtr||2|
|300mm x 10Mtr||2|
|450mm x 10Mtr||1|
|100mm x 3Mtr||6|
|150mm x 3Mtr||4|
|225mm x 3Mtr||2|
JINING XUNDA PIPE COATING MATERIALS CO.,LTD
JINING XUNDA PIPE COATING MATERIALS CERTIFICATES
Contact Person: Angelina Meng
Tel: + 8618853777531