XUNDA T100& T200 Pipeline Coating System
System Description
The Xunda anti-corrosion tape T100, mechanical protection tape T200 is a multilayer system used for the corrosion protection of oil ,gas ,and water underground or aboveground steel pipeline. T100 &T200 consist of two layers, the butyl rubber adhesive laminated on the polyethylene film backing. The T100 can be used as inner tape, T200 can be used as outer tape.
Xunda liquid adhesive can be used as primer for this system. The liquid adhesive represent an anti-corrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe.
The anti-corrosion tape assures a high bond to the primed surface with excellent conformability. The mechanical protection tape achieves a complete bond to the anti-corrosion tape.
The system can be applied by hand or with a wrapping machine.
System Features
System Properties
Anti-corrosion Tape T100 | Mechanical Protection Tape T200 | |||||||
T150 | T250 | |||||||
Backing | 0.30mm | 0.35mm | ||||||
Adhesive | 0.20mm | 0.15mm | ||||||
Tape thickness |
0.50 mm | |||||||
Width | 50mm、100mm、150mm、230mm、300 mm or others | |||||||
Length | 30m、60m、120m、180m or others | |||||||
Color | Black , Yellow ,White or others |
Product properties | Test method | Typical Value | Typical Vale |
T150 | T250 | ||
Tensile Strength | ASTM D1000 | 52N/cm | 70N/cm |
Elongation | ASTM D1000 | >400% | >400% |
System Properties : T150+T250 | |||
Peel Adhesion to Primed Steel | ASTM D1000 | 27N/cm | |
Peel Adhesion (Outer tape to inner tape ) | ASTM D1000 | 5N/cm | |
Cathodic Disbondment | ASTM G8 | 6.4mm | |
Water Vapor Transmission Rate | ASTM F1249 | 0.2g/m2 | |
Water Absorptivity | ASTM D570 | 0.1% | |
Volume Resistivity | ASTM D257 | 2.5 X 1012 ohm·cm | |
Dielectric Strength | ASTM D149 | 38 KV | |
Impact Resistance | ASTM G-14 | 5.5J | |
Temperature Range For Application For Service |
5℃ -50℃ -40℃ - 90℃ |
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111