|Product Name:||FILLER MATERIALS And PE Melt Stick||Gurantee:||1 Year|
|Materials:||Hot Melt Adhesive And Polyethylene||Manager System:||ISO 9001,ISO 14001|
|Standard:||DIN 30672||MAIN MARKET:||BANGLADESH,PAKISTAN|
butyl rubber sealing tape,
butyl rubber sealant tape
PE MELT-STICK is a heat-sensitive, PE copolymer-based stick used for small superficial, damage (scratches) to PE-coatings where the damage does not extend to the bare metal. Maximum damaged area can be 25 mm by 25 mm or 6.25 cm². Installation is done with a standard gas torch. After eliminating all sharp edges, cleaning and preheating, PE-MELT-STICK is heated above the damaged area until becoming glossy. No filler is required. The molten adhesive is spread onto the scratches, forming a tight bond with the substrate. After cool down, the hardening adhesive is smoothed flush with the PE line coating using a paint scraper.
Versatile and adaptable repair system.
Resistant to high shear forces.
Excellent adhesion to commercial PE mill-applied coatings.
Simple stick form.
No special equipment required. Benefits:
Double reconstruction of the damaged coating.
Guarantees a virtually monolithic coating repair of high quality
Makes installation faster and more convenient – saves time.
Makes installation fast and easy. Keeps installation costs low
|A) PE melt stick|
|Impact Resistance||23ºC||Nm||15 min.||DIN 30672|
|Dielectric Breakdown||23ºC||Kv||5 mi 1.||A STM D 149|
|B) PE repair patch|
|Adhesive softening point||0oC||110 min.||ASTM F-28|
|Adhesive Water Absorption||23ºC||%||0.3 Max.|
|Adhesive Sheer Strength||23ºC||MPa||1.0||ASTM D-1002|
|Tensile Strength of Backing||23ºC||MPa||17||ASTM D-638|
|Ultimate Elongation of Backing||23ºC||%||350 min.||ASTM D-638|
|Dielectric strength of backing||23ºC||KV/mm||12||ASTM D-149|
JINING XUNDA PIPE COATING MATERAILS CO.LTD OTHER PRODUCTS
JINING XUNDA PIPE COATING MATERIALS CO.,LTD-EXHIBITION
JINING XUNDA PIPE COATING MATERIALS CO LTD
Contact Person: Miss. Angelina
Tel: + 8613863735038