|
Product Details:
|
| Product Name: | Natural Gas Pipe Wrapping Anti Corrosion Coating Tape Black Color 25 Mils Thickness | Application: | Corrosion Control Of Pipelines |
|---|---|---|---|
| Thickness: | 0.635 Mm | Color: | Black |
| Available Roll Size (width X Length): | 2" To 32" X 50’ To 800’ | Similar Brand: | Polyken, Denso,Alta |
| Standard: | DIN 30672,ASTM D1000,EN 12068, AWWA C 209&214 | Export To: | Bangladesh, Ecuador,Boliva,Pakistan And So On |
| High Light: | pipeline tape,polyethylene pipe coating |
||
natural gas pipe wrapping anti corrosion coating tape black color 25 mils thickness-Inner wrap tape
The XUNDA-T-100 series is Cold applied tape coating system for corrosion protection of Oil, Gas,Petrochemical, and Waste Water underground or overhead pipelines.The inner tape shall be applied after the Liquid adhesive and before the outer-layer tape by hand or with
a wrapping machine.It can be called Inner Tape,Inner Wrapping tape,Inner layer tape,Film
Structure-Natural gas pipe wrapping anti corrosion coating tape black color :
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Film backing: Special blend of stabilized polyethylene
Features:
Excellent adhesion to pipe and self
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000,DIN 30672,EN 12068,AWWA C 214,209 Standard
Cold applied
Physical Properties
| Anti-corrosion Tape T100 | Mechanical Protection Tape T200 | |||||||
| T165 | T265 | |||||||
| Backing |
0.330 mm |
0.500 mm |
||||||
| Adhesive |
0.305 mm |
0.135 mm |
||||||
|
Tape thickness |
0.635 mm | |||||||
| Width | 50mm,100mm,150mm,225mm or others | |||||||
| Length | 30m,60m,120m,180m or others | |||||||
| Color | Black , Yellow ,White or others | |||||||
| Product properties | Test method | Typical Value | Typical Vale |
| T165 | T265 | ||
| Tensile Strength | ASTM D1000 | 52N/cm | 65N/cm |
| Yield Strength | ASTM D1000 | 45 N/cm | 45 N/cm |
| Elongation | ASTM D1000 | 300% | 385% |
| System Properties : T165+T265 | |||
| Peel Adhesion to Primed Steel | ASTM D1000 | 30N/cm | |
| Peel Adhesion (Outer tape to inner tape ) | ASTM D1000 | 5N/cm | |
| Cathodic Disbondment | ASTM G8 | 6.4mm | |
| Water Vapor Transmission Rate | ASTM F1249 | 0.2g/m2 | |
| Water Absorptivity | ASTM D570 | 0.1% | |
| Volume Resistivity | ASTM D257 | 2.5 X 1012 ohm·cm | |
| Dielectric Strength | ASTM D149 | 40 kV | |
| Impact Resistance | ASTM G-14 | 7 Nm | |
|
Temperature Range For Application For Service |
5℃ -50℃ -40℃ - 90℃ |
||
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Training how to use the pipe wrap tape,how to test the coating system
* Engineers available to service technical overseas.
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111
