|
Product Details:
|
| Simliar Brand: | Polyken,Denso,Altene | Materials: | Polyethylene+butyl Rubber |
|---|---|---|---|
| Main Market: | Iran,UAE,Iraq,Kuwait,Turkey,Egypt,Libya,Ukraine,Russia,Uzbekistan,India, Australia,Indonesia,Kazakhstan,Ecuador,Venezuela,Bolivia,Argentina, Uruguay,Malaysia And So On. | Standards: | ASTM D 1000, EN 12068 |
| Application: | Corrosion Protection For Gas,oil And Water Pipeline | Thickness: | 15mil,20mil,25mil,30mil,40 Mils,50 Mils, 65 Mils |
| High Light: | polyethylene pipe coating,corrosion resistant coatings |
||
PRODUCT NAME: ALTENE N100.25 CORROSION PROTECTION TAPE BLACK COLOR INNER WRAPPING FOR EXTERNAL COATING OF PIPES
PRODUCT DATA SHEET
XUNDA T 165
BACKING: Special blend of stabilized polyethylene
ADHESIVE: Butyl rubber and adhesive resins
COLOR:Black
|
Physical Properties |
Test Method |
Typical Value | ||
| English | Metric | |||
| Total thickness | ASTM D 1000 | 25.0 mil | 0.635mm | |
| Backing thickness | ASTM D 1000 | 13.0 mil | 0.330mm | |
| Adhesive thickness | ASTM D 1000 | 12.0 mil | 0.305 mm | |
| Tensile strength | ASTM D 1000 | 40 lbs/in | 7.2 Kg/cm width | |
| Elongation | ASTM D 1000 | 400 % | ||
|
Peel Adhesion to Primed steel At 23 ℃
At 50 ℃ To itself At 23 ℃
|
ASTM D 1000 EN 12068 EN 12068
EN 12068 ASTM D 1000 |
269 ozf/in 6.7 ozf/in 0.4 ozf/in
7.2 ozf/in 67 ozf/in |
3 Kg/cm width 0.75 N/mm 0.05 N/mm
0.80 N/mm 0.75 Kg/cm width |
|
| Water Absorption | ASTM D 570 | 0.02 % | ||
| Water Vapor Transmission Rate (24h) | ASTM E 96 | 0.01g/100sq in/24h | 0.1g/100sq mm/24h | |
| Insulation Resistance | ASTM D 257 | 106M.ohm | ||
| Dielectric Strength | ASTM D 1000 | 45 Kv/mm | ||
| Cathodich Disbonding | ASTM G 8 | 0.5 inch | 12.5 mm | |
| Application Temperature | - | 14℉-140℉ | -10 ℃ - 60 ℃ | |
| Operating Temperature | - | -40℉-185℉ | - 40 ℃ - 85℃ | |
How to apply ALTENE N100.25 CORROSION PROTECTION TAPE BLACK COLOR INNER WRAPPING FOR EXTERNAL COATING OF PIPES tapes ?
1)The inner-layer tape shall be applied directly onto the prepared pipe surface,
Wrap tape application consists of hand application and machine application.
2)The tape applied temperature must be above 5 degrees, the coating construction temperature shall be
more than -5 degrees as better.
3)The tape shall be spirally applied ,minimum overlap shall not be less than 50%.When applied to
spirally welded pipe , the direction of the tape spiral shall be generally parallel to the weld spiral.
The minimum overlap shall not be less than 25 mm.
4)When a new row of tape is started, the ends shall be overlapped at least 150 mm measured circumference.
Main standards: ASTM D 1000, EN 12068, DIN 30672, AWWA C 214, C 209
Excellent adhesion to primed steel pipe and self
long term corrosion protection , Resistant to UV
Worldwide reference lists. Established in-ground history
High chemical resistance under service temperature.
Outstanding electric property and permanent adhesion.
Cold applied, No release liner. Makes installation fast and easy.
JINING XUNDA PIPE COATING MATERIALS CO.,LTD
XUNDA OTHER PRODUCTS: inner wrapping, outer wrapping, joint wrapping, bitumen wrapping, butyl rubber tape, flashing tape, primer, petroluem tape and so on
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111
