|Tape Name:||Aluminium Butyl Rubber Waterproofing Sealing Stop Leak Tape For The Solar Panels||Wide:||50 Mm, 100 Mm,150 Mm, 200 Mm, 300 Mm To 1000 Mm|
|Long:||5 M, 10 M, 20 M||Thickness:||1.0 Mm To 2.0 Mm|
|Application Field:||Waterproofing,sealing,transfering||Adhesive Color:||White, Black, Gray|
waterproof duct tape,
adhesive flashing tape
aluminium butyl rubber waterproofing sealing stop leak tape for the solar panels
XUNDA aluminium butyl rubber waterproofing sealing stop leak tape XUNDAT 700 is constructed using an ultra-strong butyl adhesive coated onto a puncture resistant laminated foil. This tape is available in white, lead, or aluminum finish and is highly conformable. This makes Butyl Flashing tape ideal for a very wide range of repair applications and for sealing leaking components.
aluminium butyl rubber waterproofing sealing stop leak tape Typical Applications
HVAC– Sealing leaking pipes and chambers
Caravans– Sealing leaking panels
Building & Construction– Flashing and repairing gutters and downpipes
Conservatories– Flashing the roof and sealing T Bars
Roofing & Cladding– Flashing off roofs
|Order Thickness||0.80 mm,1.0 mm,1.2 mm,1.5 mm,2.0 mm|
|Order Width||50 mm,75 mm,100 mm,150 mm,200 mm,300 mm,450 mm,1000 mm|
|Order Length||5 m, 10 m, 15 m, 20 m or jumbo roll|
|Adhesive color||Black, Gray,White|
|Alu foil color||Embossing square sliver alu foil, red alu foil, blue alu foil, gray alu foil|
Application method-aluminium butyl rubber waterproofing sealing stop leak tape
The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent/cleaner.
For older roofs use a stiff brush to remove all loose granules and surface elements.
Porous surfaces should be primed with a common asphalt based primer and allowed to dry before Xunda-T 700 is applied.
Install Xunda-T 700 by gradually peeling away the plastic release liner while rubbing the Xunda-T 700 to the surface.
Hint: prevent bubbles under the product by using your hand to squeegee out air by wiping your hand towards the roll as you set the tape to the surface.
Overlap seams or sealing are of application by 3 inches.
Industries that We Serve
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical standards and norms governed within the energy and pipeline industry.
Coating systems that have a broad range of temperature and shear resistance properties to meet the requirements of the pipeline and end-user.
JINING XUNDA PIPE COATING MATERIALS CO.,LTD OTHER PRODUCTS:
Xunda has more than 100 workers, covers an area of 100,000 ², Productivity is 25 tons each day,
including PE pipe wrap tape, PVC pipe wrap tape, PP fiber woven tape, butyl rubber tape,heat shrinkable sleeve, bitumen tape and water proof Aluminum flashing tape.
Besides we have many different types butyl rubber tape, double sided adhesive tape
Contact Person: Miss. Angelina
Tel: + 8613863735038