|Tape Name:||Sealing Leaking Roofs Aluminum Flashing Tape Single Layer Adhesive With Butyl Rubber||Tape Wide:||50 Mm, 100 Mm,150 Mm, 200 Mm, 300 Mm To 1000 Mm|
|Butyl Tape Long:||5 M, 10 M, 20 M||Thickness:||1.0 Mm To 2.0 Mm|
|Application Field:||Waterproofing,sealing,transfering||Adhesive Color:||White, Black, Gray,Yellow|
sealing leaking roofs aluminum flashing tape single layer adhesive with butyl rubber
sealing leaking roofs aluminum flashing tape is based on butyl rubber, high polymer resin and high quality tackifier with the surface materials like EPDM, polyethylene film, aluminum foil and non woven,etc. The product has strong bond performance and self-healing performance, suitable for high and low temperature environment construction.Mostly the alumiumium foil and non-woven as backing material more popular.
|such as Embossing square sliver alu foil, red alu foil, blue alu foil, gray alu foil|
|Single-sided||Aluminum foil, Non woven, PE film, EPDM,etc.|
|Double-sided||No base material|
Techinica data sheet for sealing leaking roofs alumium flashing tape
|Persistent adhesion,Min||Upper surface||≧20||48||Pass|
|2||Heat-resistant properties,80℃,2h||No flow, crack,deformation||No flow, crack,deformation||Pass|
|3||Low temperature flexibility,-40℃||No crack||No crack||Pass|
|4||Adhesive performance on shear condition,N/mm||Waterproofing roll||≧2.0||5.3||Pass|
|5||Peel strength,N/mm||Waterproofing roll||≧0.4||1.4||Pass|
|Cement mortar board||≧0.6||1.4||Pass|
|6||Peel strength retention rate,%|
|saturated calcium hydroxide solution,168h||Waterproofing roll||≧80||96||Pass|
|Cement mortar board||128||Pass|
|Soaking treatment,168h||Waterproofing roll||≧80||85||Pass|
|Cement mortar board||124||Pass|
1. Excellent elastic and elongation, well adapted to the deformation and cracking of the base.
2. Good adhesion to the base.
3. Highly distinctive "self-healing function", able to self-heal after minor puncture damage and maintain good waterproof performance.
4. Good waterproofing performance, corrosion resistance and aging resistance.
5. Environmental protection and safe, non-toxic and tasteless, without polluting the environment.
6.The construction is simple and safe, no need for hot melt, just tear off the isolation layer, then paste it to the base.
Application method-aluminium butyl rubber waterproofing sealing stop leak tape
The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent/cleaner.
For older roofs use a stiff brush to remove all loose granules and surface elements.
Porous surfaces should be primed with a common asphalt based primer and allowed to dry before Xunda-T 700 is applied.
Install Xunda-T 700 by gradually peeling away the plastic release liner while rubbing the Xunda-T 700 to the surface.
Hint: prevent bubbles under the product by using your hand to squeegee out air by wiping your hand towards the roll as you set the tape to the surface.
Overlap seams or sealing are of application by 3 inches.
Industries that We Serve
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical standards and norms governed within the energy and pipeline industry.
Coating systems that have a broad range of temperature and shear resistance properties to meet the requirements of the pipeline and end-user.
Xunda has more than 100 workers, covers an area of 100,000 ², Productivity is 25 tons each day,
including PE pipe wrap tape, PVC pipe wrap tape, PP fiber woven tape, butyl rubber tape,heat shrinkable sleeve, bitumen tape and water proof Aluminum flashing tape.
Besides we have many different types butyl rubber tape, double sided adhesive tape
Contact Person: Miss. Angelina
Tel: + 8613863735038