|
Product Details:
|
| Product Name: | Polypropylene Fiber Woven Tape | Application: | Corrosion Control Of Pipelines And Building Waterproofing |
|---|---|---|---|
| Thickness: | 0.8mm To 2.0mm | Color: | Black |
| Available Roll Size (width X Length): | 2" To 32" X 10’ To 325’ | Similar Brand: | Polyken, Denso,Alta |
| Standard: | ASTM D1000 | Backing Film: | Backing Film PP Woven Fabric Cloth |
| Adhesive Layer: | Butyl Rubber Bituminous Compound | ||
| High Light: | polypropylene tape,waterproof seal tape |
||
Metallic Pipelines Polypropylene Fiber Woven Tape Waterproof and Anti Rust 0.8mm - 2.0mm
1. Polypropylene fiber woven tape system description:
The Polypropylene fiber woven tape is cold applied tape for both metallic pipelines and waterproofing works against outdoor bad weathers .
The Polypropylene fiber woven tape shall be applied after the Liquid adhesive by hand or with a wrapping machine.
|
Waterproofing- |
Pipelines protection |
|
-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course. -Tough, high performance waterproof membrane for critical substructures and civil engineering works. -Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts. -Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt |
_ Weld joints _ Bends _ Fittings _ Bare pipe lengths _ Pipe rehab and repair -Bare pipe length
|
2. Polypropylene fiber woven tape structures
The specification of the tape consists of three layers,
Adhesive layer: Butyl rubber Bituminous Compound
Backing : PP woven fabric cloth
Interleaf: Antiadhesive Film Treated with Silicone
3. Polypropylene fiber woven tape features
|
Waterproofing- |
Pipes protection |
|
-Cold applied. -High resistance to bad weather environment -Good performance itself to keep dry -Easily application &installation. -Suitable for a wide range of temperatures - Compatible primers -Safe,clean |
_ Cold applied _ Excellent self adhesion to pipe _ Flexibility provides extra protection at vulnerable areas _ Excellent conformability and consistent uniform thickness _ Easily applied with no special equipment _ Compatible with common pipe coatings _ Excellent resistance to cathodicdisbonding _Wider service temperature range
|
Polypropylene fiber woven tape physical Properties
|
Item |
T 5100 |
T 5130 |
T 5150 |
T 5165 |
|
|
Total thickness (mil) |
40mils |
50mils |
60mils |
65mils |
|
|
Tensile Strength (lb/in) |
30(5kg/cm) |
35(6.3kg/cm) |
39(7kg/cm) |
42(7.5kg/cm) |
|
|
Elongation (%) |
400 |
400 |
450 |
500 |
|
|
Length |
25mtrs |
20mtrs |
15mtrs |
10mtrs |
|
|
Width |
2“,4”,6”,9” |
||||
|
Peeladhesion To primed pipe (oz/in) |
269(3kg/cm) |
296(3.3kg/cm) |
314 (3.5kg/cm) |
340(3.8kg/cm) |
|
|
To backing (oz/in) |
90(1kg/cm) |
90(1kg/cm) |
117(1.3kg/cm) |
135(1.5kg/cm) |
|
|
Dielectric Strength (KV/mm) |
42 |
42.6 |
43 |
43.8 |
|
|
Volume Resistivity (ohm·m) |
2.5 X 1012 |
2.5 X 1012 |
2.5 X 1012 |
2.5 X 1012 |
|
|
Water Vapor Transmission Rate (g/ m2/24h) |
0.06 |
0.05 |
0.03 |
0.02 |
|
|
Water Absorptivity (%) |
0.1 |
0.1 |
0.1 |
0.1 |
|
|
Application Temperature (°F) |
-31-+160 (-35-+70℃) |
||||
|
Max service temperature (°F) |
-40-+250 (-40-+121℃) |
||||
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111
