Product Details:
|
Simliar Brand: | Polyken | Materials: | Polyethylene+butyl Rubber |
---|---|---|---|
Test Report: | SGS,DVGW,AWWA | Service Life: | More Than 30 Years |
Main Market: | Iran,UAE,Iraq,Kuwait,Turkey,Egypt,Libya,Ukraine,Russia,Uzbekistan,India, Australia,Indonesia,Kazakhstan,Ecuador,Venezuela,Bolivia,Argentina, Uruguay,Malaysia And So On. | Color: | White |
Standards: | ASTM D 1000, EN 12068 | Application: | Corrosion Protection For Gas,oil And Water Pipeline |
High Light: | pipe wrap insulation tape,pipe wrapping tape |
Pipe wrapping tapes equivalent to polyken 950
Pipe wrapping tapes equivalent to polyken 950 System description:
The XUNDA-T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The pipe wrapping outer tape shall be applied after the inner-layer tape by hand or with a wrapping machine
Pipe wrapping tapes equivalent to polyken 950 Structure:
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Film backingr: Special blend of stabilized polyethylene
Pipe wrapping tapes equivalent to polyken 950 Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Pipe wrapping tapes equivalent to polyken 950 Physical Properties:please contact us for getting it.
Properties
Type |
980-15 |
980-20 |
980-25 |
980-30 |
955-20 |
955-25 |
955-30 |
|
Thickness |
15mil 0.38mm |
20mil 0.508mm |
25mil 0.635mm |
30mil 0.762mm |
20mil 0.508mm |
25mil 0.635mm |
30mil 0.762mm |
|
Backing |
9mil 0.229mm |
9mil 0.241mm |
10mil 0.25mm |
10mil 0.25mm |
15mil 0.38mm |
20mil 0.508mm |
25mil 0635mm |
|
Adhesive |
6mil 0.152mm |
11mil 0.279mm |
15mil 0.381mm |
20mil 0.508mm |
5mil 0.127mm |
5mil 0.127mm |
5mil 0.127mm |
|
When used for ductile iron pipes inner layer 980-20 or 980-25 and outer layer 955-20 or 955-25 are recommended. |
||||||||
Elongation |
³300% |
³400% |
||||||
Tensile Strength |
55 N/cm |
70 N/cm |
||||||
Color |
Black |
White |
||||||
Peel Adhesion to Primed Pipe |
33 N/cm |
|||||||
Dielectric Strength |
30 KV |
|||||||
Dielectric Breakdown |
26 KV/mm |
|||||||
Cathodic Disbandment |
0.24 in radius 6.4 mm |
|||||||
Water Vapor Transmission Rate |
< 0.1% |
|||||||
Volume Resistivity |
2.5 x 1015 ohm.cm |
|||||||
Impact resistance |
5.5Nm |
|||||||
Penetration Resistance |
<15% |
|||||||
Performance |
AWWA C-209,ASTM D 1000,EN 12068 |
|||||||
Order information
Length |
100ft(30 M),200ft(60 M),400ft(120 M),800ft(240 M) |
Width |
2’’(50mm),4’’(100mm),6’’(150mm),17’(450mm),32’’(800mm) |
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111