|
Product Details:
|
| Standard: | AWWA C 214, C 209 | Service Life: | More Than 30 Years |
|---|---|---|---|
| Similar Brand: | Polyken, Denso,Altene | Available Width: | 50 Mm To 800 Mm |
| Avaliable Length: | 100 Ft To 1000 Ft | Peel Adhesion: | 25N/cm |
| Color: | Black | Materials: | Polyethylene Film And Butyl Adhesive |
| Uses: | Pipe Corrosion Protection | ||
| High Light: | insulation tape for pipes,corrosion protection materials |
||
0.3mm thick and black color pipe insulation tape for oil gas water pipeline
Pipe insulation tape System description:
This Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The pipe insulation tape shall be applied after the adhesive of tape and before the by hand or with a wrapping machine
Pipe insulation tape Structure:
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Film backing: Special blend of stabilized polyethylene
Pipe insulation tape Features:
Excellent adhesion to pipe and self
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Pipe insulation tape Physical Properties
|
Physical Properties |
Test Method |
Typical Value |
|
Total thickness |
ASTM D 1000 |
0.30 mm (12 mils) |
|
Backing thickness |
ASTM D 1000 |
0.15mm(6.mils) |
|
Adhesive thickness |
ASTM D 1000 |
0.15 mm(6 mils) |
|
Width |
- |
50 -800 mm |
|
Length |
- |
30 -240 m |
|
Backing colour |
- |
Black,Yellow or others |
|
Tensile strength |
ASTM D 1000 |
33 N/ cm |
|
Elongation |
ASTM D 1000 |
300 % |
|
Peel Adhesion to primed steel pipe |
ASTM D 1000 |
15 N/cm |
|
Cathodic Disbandment |
ASTM G8 |
0.25 in radius 6.4 mm |
|
Dielectric Strength |
ASTM D 149 |
8 Kv |
|
Volume Resistivity |
ASTM D 257 |
1.5x1012 ohm.cm |
|
Water Absorptivity |
ASTM D 570 |
0.07 % |
|
Water Vapor Transmission Rate (24h) |
ASTM F1249 |
0.1g/100sq mm/24h |
|
Application Temperature |
|
-10 ℃ - 60 ℃ |
|
Max Service Temperature |
|
- 40 ℃ - 80℃ |
Industries that We Serve
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Offshore Industry
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical standards and norms governed within the energy and pipeline industry.
Coating systems that have a broad range of temperature and shear resistance properties to meet the requirements of the pipeline and end-user.
JINING XUNDA PIPE COATING MATERIALS CO.,LTD -CERTIFICATES
JINING XUNDA PIPE COATING MATERIALS CO.,LTD-WORKSHOP
JINING XUNDA PIPE COATING MATERIALS CO.,LTD-HOUSE TEST
DO you need other pipeline corrosion protection tapes? please check with us, maybe we can supply to you.
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111
