|
Product Details:
|
| Product Name: | Polyethylene Bitumen Wrap Tape For Buried Pipe 1.65 Mm Thickness,225 Mm Wdith | Application: | Corrosion Control Of Pipelines And Building Waterproofing |
|---|---|---|---|
| Thickness: | 1.65 Mm | Color: | Black,Yellow,Silver |
| Width: | 225 Mm | Similar Brand: | Polyken, Denso,Alta |
| Backing Film: | Polyethylene / Aluminum | Adhesive Layer: | Butyl Rubber Modified Bitumen |
| Uses: | Pipe Corrosion Protection Or Building Waterproofing | ||
| High Light: | self adhesive bitumen waterproof tape,bitumen adhesive tape |
||
XUNDA T 600 Polyethylene bitumen Wrap tape for Buried Pipe
Specification
| Product Style No. | XUNDA T 600 |
| Storage life | 24 months |
| Service life | More than 30 years |
| Storage temperature | 5 C - 50 C |
| Main Market | Russian,Ukraine,UAE,Middle east |
XUNDA T 600 Polyethylene bituminous tape for protection of pipelines from Corrosion, Tapes for waterproofing of roofs, waterproofing of foundations, for basements and underground jobs, waterproofing of swimming pools
XUNDA T 600 Polyethylene bituminous tape Used for the anti-corrosion protection of buried or immersed pipes and fittings. Applied to weld joints, bends, bare pipe lengths and pipe fittings.
XUNDA T 600 Polyethylene bitumen Wrap tape for Buried Pipe
XUNDA-T 6165
|
Physical Properties |
Test Method |
Typical Value | |
| English | Metric | ||
| Total thickness | ASTM D 1000 | 65.0 mil | 1.65 mm |
| Width | - | 2’’- 32 ‘’ | 50 -800 mm |
| Length | - | 33’ -200 ‘ | 10 -60 m |
| Backing colour | - | Black,Yellow or others | |
| Tensile strength | ASTM D 1000 | 75 N/cm | |
| Peel Adhesion to primed steel pipe | ASTM D 1000 | 35 N/cm | |
| Elongation | ASTM D 1000 | 400% | |
| Cathodic Disbandment | ASTM G8 | 0.25 in radius 6.4 mm | |
| Dielectric Strength | ASTM D 149 | 42 Kv | |
| Volume Resistivity | ASTM D 1000 | 1.2x1012 ohm.cm | |
| Water Absorptivity | ASTM D 570 | 0.1 % | |
| Water Vapor Transmission Rate (24h) | ASTM F1249 | 0.1g/100sq mm/24h | |
| UV resistance | Excellent | ||
| Application Temperature | 23℉-140℉ | -5 ℃ - 60 ℃ | |
| Max Service Temperature | -4℉-176℉ | - 20 ℃ - 80℃ | |
XUNDA T 600 Polyethylene bitumen Wrap tape for Buried Pipe- Application:
Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease.Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness.
Irregular surfaces such as valves, flanges, etc. may require the use of Mastic or Profiling Mastic. Refer to the product sheets for these specific
products for information on application and selection.
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111
