|
Product Details:
|
| Product Name: | Self Adhesive Bitumen Tape | Application: | Corrosion Control Of Pipelines And Building Waterproofing |
|---|---|---|---|
| Thickness: | 1.0mm | Color: | Black,Yellow,Silver |
| Available Roll Size (width X Length): | 2" To 32" X 10’ To 325’ | Similar Brand: | Polyken, Denso,Alta |
| Backing Film: | Polyethylene/Aluminum | Adhesive Layer: | Butyl Rubber Modified Bitumen |
| Service Life: | More Than 30 Years | Standard: | ASTM D 1000,AWWA C 209 |
| High Light: | self adhesive flashing tape,self adhesive bitumen waterproof tape |
||
White or Black color Anti-corrosive self adhesive bituminous tape for oil pipeline
Specification-
White or Black color Anti-corrosive bituminous tape for oil pipeline
|
Product Style No. |
XUNDA T 500 T 600 T 700 |
|
Storage life |
24 months |
|
Service life |
More than 30 years |
|
Storage temperature |
5 C - 50 C |
|
Main Market |
Middles east,Middle Asia,Southeast Asia |
Production description-
White or Black color Anti-corrosive bituminous tape for oil pipeline
The XUNDA-T600 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, Waste Water underground or overhead pipelines and waterproofing.
The anti-corrosive bituminous tape shall be applied after the primer by hand or with a wrapping machine ( we can supply hand applied wrapping machine and automatic wrapping machine too)
Industries we served
-Oil, Gas and Water Transmission pipeline market
-Oil and Gas distribution and utility marketsNew pipeline construction markets
-Rehabilitation and Reconditioning market
-Offshore IndustryRefinery and Petrochemical Plant Industry
-Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
-Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
-Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
-Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
Size of anti-corrosive bitumen wrapping tape
|
Item |
min |
max |
Unit |
|
width |
50 |
800 |
mm |
|
length |
10 |
200 |
meter |
|
Thickness |
1.0 |
3.0 |
mm |
|
Color |
Black,white,yellow.blue |
||
Anti-corrosive bituminous tape -Physical Properties
XUNDA-T 6100
|
Physical Properties |
Test Method |
Typical Value |
|
|
English |
Metric |
||
|
Total thickness |
ASTM D 1000 |
40.0 mil |
1.00 mm |
|
Width |
- |
2’’- 32 ‘’ |
50 -800 mm |
|
Length |
- |
33’ -200 ‘ |
10 -60 m |
|
Backing colour |
- |
Black,Yellow or others |
|
|
Tensile strength |
ASTM D 1000 |
28 lbs/in |
50 N/cm |
|
Peel Adhesion to primed steel pipe |
ASTM D 1000 |
320 oz/in |
35 N/cm |
|
Cathodic Disbandment |
ASTM G8 |
0.25 in radius 6.4 mm |
|
|
Dielectric Strength |
ASTM D 149 |
42 Kv |
|
|
Volume Resistivity |
ASTM D 1000 |
1.2x1012 ohm.cm |
|
|
Water Absorptivity |
ASTM D 570 |
0.07 % |
|
|
Water Vapor Transmission Rate (24h) |
ASTM F1249 |
0.01g/100sq in/24h |
0.1g/100sq mm/24h |
|
UV resistance |
|
Excellent |
|
|
Application Temperature |
|
23℉-140℉ |
-5 ℃ - 60 ℃ |
|
Max Service Temperature |
|
-4℉-176℉ |
- 20 ℃ - 80℃ |
Application- Anti-corrosive bituminous tape
Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease.Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness.Irregular surfaces such as valves, flanges, etc. may require the use of Mastic or Profiling Mastic.( we can supply it also ) Refer to the product sheets for these specific products for information on application and selection.
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than one full 20 ft container.
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your thickness or the total coating thickness
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.We can print your logo on the carton or the inner core.
A: Yes, we offer 1-3 years warranty to our products according to the different products
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we can replace it with your new order together , but we have to get some proof to supply to our directorate
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111
