|
Product Details:
|
| Standard: | AWWA C 214, C 209 | Service Life: | More Than 30 Years |
|---|---|---|---|
| Similar Brand: | Polyken, Denso,Altene | Available Width: | 50 Mm To 800 Mm |
| Avaliable Length: | 100 Ft To 1000 Ft | Peel Adhesion: | More Than 20 N/cm |
| Color: | Black | Materials: | Polyethylene Film And Butyl Adhesive |
| High Light: | pipeline tape,polyethylene pipe coating |
||
COLD-APPLIED LAMINATED PLASTIC TAPE as inner layer tape
The inner-layer tape is a prefabricated tape consisting of a plastic backing of a polyethylene film and an adhesive layer of homogeneous elastomeric-sealant component laminated to the polyethylene film.
The finished material will provide high electrical resistivity, pliability and conformability, resistance to corrosive environments, low moisture absorption and permeability, ability to remain in place on the pipe during its normal service life, and shall provide an effective bond to the primed steel surface. It shall be such a nature as to resist fungi, bacteria, plant root, and also excessive mechanical damage during normal application operations.
The cold applied laminated plastic inner-layer tape shall be sufficiently pliable for normal application operations and shall withstand, without tearing, the tensile force necessary to obtain a tightly wrapped inner coating free of voids.
Black cold-applied laminated plastic inner layer tape T 175
|
Item |
Unit |
Typical value |
Test method |
|
Color |
— |
Black |
Visual |
|
Width Deviation |
% |
1 |
ASTM D1000 |
|
Total thickness |
mm |
0.762(30 mils) |
ASTM D1000 |
|
Backing thickness |
mm |
0.41 |
ASTM D 1000 |
|
Adhesive thickness |
mm |
0.35 |
ASTM D 1000 |
|
Adhesion to primed steel |
N/m |
3,500 |
ASTM D 1000 |
|
Water absorption(24hr) |
% |
0.12 |
ASTM D 570 |
|
Water-Vapor transmission |
perms |
0.10 |
ASTM E 96 |
|
Dielectric strength |
V |
36,000 |
ASTM D 149 |
|
Insulation resistance |
megohms |
1.2X1012 |
ASTM D 1000 |
|
Tensile strength |
N/m |
5,800 |
ASTM D 1000 |
|
Elongation |
% |
500 |
ASTM D 1000 |
|
Impact Resistance |
N.m |
7 |
ASTM G 14 |
|
Nonpolyolefinic material,percent by weight |
% |
1.40 |
ASTM D 4218 |
|
Ratio of adhesive to total inner layer tape thickness |
% |
47 |
ASTM D 1000 |
|
Application temperature |
℃ |
-10 - 60 |
|
|
Max Service temperature |
℃ |
-40 - 80 |
|
Our cold-applied laminated plastic tape suitable for the following area:
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Offshore Industry
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical standards and norms governed within the energy and pipeline industry.
Coating systems that have a broad range of temperature and shear resistance properties to meet the requirements of the pipeline and end-user.
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111
