Product Details:
|
Materials: | Polyethylene+butyl Rubber | Test Report: | SGS,DVGW,AWWA |
---|---|---|---|
Service Life: | More Than 30 Years | Main Market: | Iran,UAE,Iraq,Kuwait,Turkey,Egypt,Libya,Ukraine,Russia,Uzbekistan,India, Australia,Indonesia,Kazakhstan,Ecuador,Venezuela,Bolivia,Argentina, Uruguay,Malaysia And So On. |
Color: | White,gray,yellow,black | Standards: | ASTM D 1000, EN 12068 |
Application: | Corrosion Protection For Gas,oil And Water Pipeline | Similar Brand: | Polyken,DENSO,ALTA,Shaic |
ISO Certerficate: | ISO 9001, ISO 14001, OHSMS 18001 | ||
High Light: | steel pipes coating materials,wrapping coating material |
STEEL PIPE CORROSION PROTECTION COATING TAPE System description:
The XUNDA-T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The pipe wrapping outer tape shall be applied after the inner-layer tape by hand or with a wrapping machine
STEEL PIPE CORROSION PROTECTION COATING TAPE Structure:
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Film backingr: Special blend of stabilized polyethylene
STEEL PIPE CORROSION PROTECTION COATING TAPEFeatures:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
STEEL PIPE CORROSION PROTECTION COATING TAPE Physical Properties:please contact us for getting it.
Properties
Type |
980-15 |
980-20 |
980-25 |
980-30 |
955-20 |
955-25 |
955-30 |
|
Thickness |
15mil 0.38mm |
20mil 0.508mm |
25mil 0.635mm |
30mil 0.762mm |
20mil 0.508mm |
25mil 0.635mm |
30mil 0.762mm |
|
Backing |
9mil 0.229mm |
9mil 0.241mm |
10mil 0.25mm |
10mil 0.25mm |
15mil 0.38mm |
20mil 0.508mm |
25mil 0635mm |
|
Adhesive |
6mil 0.152mm |
11mil 0.279mm |
15mil 0.381mm |
20mil 0.508mm |
5mil 0.127mm |
5mil 0.127mm |
5mil 0.127mm |
|
When used for ductile iron pipes inner layer 980-20 or 980-25 and outer layer 955-20 or 955-25 are recommended. |
||||||||
Elongation |
³300% |
³400% |
||||||
Tensile Strength |
55 N/cm |
70 N/cm |
||||||
Color |
Black |
White |
||||||
Peel Adhesion to Primed Pipe |
33 N/cm |
|||||||
Dielectric Strength |
30 KV |
|||||||
Dielectric Breakdown |
26 KV/mm |
|||||||
Cathodic Disbandment |
0.24 in radius 6.4 mm |
|||||||
Water Vapor Transmission Rate |
< 0.1% |
|||||||
Volume Resistivity |
2.5 x 1015 ohm.cm |
|||||||
Impact resistance |
5.5Nm |
|||||||
Penetration Resistance |
<15% |
|||||||
Performance |
AWWA C-209,ASTM D 1000,EN 12068 |
|||||||
Description |
Outer wrap tape T200 is engineered to achieve a complete bond to the inner layer tape, providing maximum handling and in-service protection for the coating system. |
Usage |
Outer wrap tape T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water pipeline. Pipe can be buried, underground ,overhead ,onshore and offshore . |
Features
& Benefits |
Excellent adhesion to inner-layer tape and self long term corrosion protection , Resistant to UV Worldwide reference lists. Established in-ground history High chemical resistance under service temperature. Outstanding electric property and permanent adhesion. Cold applied, No release liner. Makes installation fast and easy. Complies with ISO,DIN30672,AWWAC214 209,ASTMD1000.EN12068 |
Material: |
Polyethylene backing+ Butyl rubber |
MOQ: |
500 roll |
Package: |
12 rolls,6 rolls,4 rolls |
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111