|Product Name:||Polymer Modified Asphalt Tape||Application:||Pipe Sealing Or Construction Waterproof|
|Thickness:||1.0mm,1.27mm.1.65 Mm||Color:||Black,Yellow, Silver, Gray Or Others|
|Width:||50mm,75mm,100mm,150mm, 200mm,250mm.300mm||Similar Brand:||Polyken, Denso,Alta，polyguard|
|Length:||10m,15 M,20 M,30 M||Main Market:||Southeast Asia|
window flashing tape,
waterproof duct tape
polymer modified asphalt tape Specification
|Product Style No.||XUNDA T 600|
|Storage life||24 months|
|Service life||More than 30 years|
|Storage temperature||5 C - 50 C|
It is polymer modified asphalt-based materials, the surface covered with polyethylene film, aluminum foil, the base covered with a removable Polyethylene film protection kind of self-adhesive flexible waterproof membrane.
It has a good self-adhesive can and bending properties, construction is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works.,Low-temperature-resistant properties of the product, and the MTR, tunnels and the scene of the fire with the best waterproof, moisture resistance and sealing materials, also apply to pipeline waterproof, anti-corrosion works.
Heavy duty butyl bitumen compound adhesive
Excellent adhesion to pipe and self
Flexibility provides extra protection at vulnerable areas
Excellent conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
|Thickness||40 mils (1.0 mm ) 50 mils (1.27 mm) 60 mils (1.50 mm) 65 mils (1.65 mm)|
|Length||50 ft ( 15 m ) 100ft(30 M),200ft(60 M),400ft(120 M),800ft(240 M)|
|Width||2’’(50mm),4’’(100mm),6’’(150mm),12’’(300 mm ) 17’(450mm),32’’(800mm)|
How to apply polymer modified asphalt tape?
Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease.Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness.
Irregular surfaces such as valves, flanges, etc. may require the use of Mastic or Profiling Mastic.( we can supply it also ) Refer to the product sheets for these specific
products for information on application and selection.
Industries we served
-Oil, Gas and Water Transmission pipeline market
-Oil and Gas distribution and utility marketsNew pipeline construction markets
-Rehabilitation and Reconditioning market
-Offshore IndustryRefinery and Petrochemical Plant Industry
-Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
-Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
-Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
-Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
JINING XUNDA PIPE COATING MATERIALS CO.,LTD -CONTACT INFORMATION
Contact Person: Miss. Angelina
Tel: + 8613863735038