|
Product Details:
|
| PRODUCT NAME: | Corrosion Protective Pipeline Tape Wrapping Coating And Prime | APPLICATION: | ANTI CORROSION PROTECTION |
|---|---|---|---|
| TENSILE STRENGTH: | MORE THAN 55N/CM | COLOR: | BLACK,WHITE,BLUE |
| BACKING: | POLYETHYLENE | ADHESIVE: | BUTYL RUBBER OR MODIFY ASPHALT |
| High Light: | polyethylene pipe coating,corrosion resistant coatings |
||
Corrosion protective Pipeline tape wrapping coating
Product Description:
The Corrosion protective pipeline tape wrapping coating main Materials used are stabilized Polyethylene backing and Butyl Rubber base synthetic adhesive. The backing and adhesive materials that can provide high electrical resistivity resistance to corrosive environments , low moisture absorption and permeability and provide an effective bond to primed steel surface
Product Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Product Specification:
Thickness : 12 mils to 80 mils
Width: 2 inch to 33 inch
Length: 50ft to more longer
Color:black,white,yellow,blue
Product Application:
provides a permanent bond to the primed steel pipes surface and provides corrosion protection against chemical electrolytic corrosion for under ground and off shore pipeline.
PRODUCT TDS
|
Physical Properties |
Test Method |
Typical Value |
| Total thickness | ASTM D 1000 | 1.60 mm |
| Backing thickness | ASTM D 1000 | 0.75 mm |
| Adhesive thickness | ASTM D 1000 | 0.85 mm |
| Tensile strength | ASTM D 1000 | 13 N/mm |
| Elongation | ASTM D 1000 | 300 % |
| Tear Resistance | ASTM D 1004 | 60 N |
| Impact Resistance (double layer) | ASTM G 14 | 16 Joules |
| Peel Adhesion to Primed steel | ASTM D 1000 | 3.8 N/mm |
| Peel Adhesion to tape | ASTM D 1000 | 2.5 N/mm |
| Water Absorption | ASTM D 570 | 0.10 % |
| Water Vapor Transmission Rate (24h) | ASTM E 96 | 0.2g/100sq mm/24h |
| Insulation Resistance | ASTM D 257 | 106M.ohm |
| Dielectric Strength | ASTM D 1000 | 45 Kv/mm |
| Application Temperature | - | -10 ℃ - 60 ℃ |
|
Operating Temperature
|
- |
- 40 ℃ - 85℃ |
JINING XUNDA PIPE COATING MATERIALS CO LTD FACTORY SHOW
TRADE SHOW
CUSTOMER VISITING SHOW
SHIPMENT SHOW
hot line
+86 13863735038 (whatsapp)
Skype:exptape
Angelina Meng
Contact Person: Miss. Angelina
Tel: + 8613863735038
Fax: 86-537-2299111
